- Clean your ceiling or other surface. Be sure it is smooth, dry and free of dust and dirt.
- Measure the ceiling.
- Unpack and spread out the graphic sheets on a flat surface.
- Cut the graphic sheet to size if you need.
- Start from a corner and gently roll the white backing from the transfer sheet. Make sure that none of the sticker pieces is left on the backing paper.
- Face the self-adhesive side of the sticker down on the location that you desire and apply even, firm pressure to ensure complete removal of any bubbles.
- Bubbling may occur after the graphics are applied. Simply take a thumbtack or needle and poke the bubbled area a couple of times, then smooth it out with your hands.